x86osx: CMOS

레이블이 CMOS인 게시물을 표시합니다. 모든 게시물 표시

2009년 2월 15일 일요일

GIGABYTE GA-EP45-DS3P CMOS SETUP 설정

Load Optimized Defaults.
Standard CMOS Features - Floppy 3 mode Support [Disabled] >>>> Change to Enabled.
Advanced BIOS Features - Limit CPUID Max. to 3 [Disabled] <<<<< defualt: CPU.
Advanced BIOS Features - C2/C2E State Support [Disabled] <<<<< defualt: CPU.
Advanced BIOS Features - C4/C4E State Support [Disabled] <<<<< defualt: CPU.
Intergrated Peripherals - SATA RAID/AHCI Mode [AHCI] <<<<< change: HDD.
Intergrated Peripherals - 아래 Native ..............>>>> change to Enabled..-중요~!
Intergrated Peripherals - Onboard IDE Controller [Disabled] <<<<< change
Intergrated Peripherals - Onboard Serial Port 1 [Disabled] <<<<< change.
Standard CMOS Features - Floppy 3 mode Support [Disabled] >>>> Change to Enabled.
USB Lagacy Keyboard - Enabled
USB Lagacy Mouse - Enabled

2009년 2월 13일 금요일

CMOS setup 방법

I. CMOS setup 방법.
Standard CMOS Features.:
Change the Date and Time to the correct values
Set “Drive A” to “None”
Set “Floppy 3 Mode Support” to “Disabled’
Set “Halt On” to “All, But Keyboard”
Advanced BIOS Features:
1. Set “First Boot Device” to “Hard Disk”
Set “Second Boot Device” to “CDROM”
Set “Third Boot Device” to “Disabled”
Set “HDD S.M.A.R.T. Capability” to “Enabled”
Set “Limit CPUID Max. to 3” to “Disabled”
Set “No-Execute Memory Protect” to “Enabled”
Set “CPU Enhanced Halt (C1E)” to “Enabled”
Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”
Set “CPU EIST Function” to “Enabled”
Set “Virtualization Technology” to “Enabled”
Set “Full Screen LOGO Show” to “Disabled”
Set “Init Display First” to “PEG”
Execute Disable Bit to “Enabled”
Integrated Peripherals:
Set “SATA AHCI Mode” to “AHCI”
Set “SATA Port0-1 Native Mode” to “Enabled”
Set “USB Controller” to “Enabled”
Set “USB 2.0 Controller” to “Enabled”
Set “USB Keyboard Support” to “Enabled”
Set “USB Mouse Support” to “Enabled”
Set “Legacy USB storage detect” to “Enabled”
Set “Azalea Codec” to “Auto”
Set “Onboard H/W LAN” to “Enabled”
Set “Onboard IDE Controller” to “AHCI”
Set “Onboard Serial Port 1” to “Disabled"
Set “Onboard Parallel Port” to "Disabled”
Power Management Setup:
Set “ACPI Suspend Type” to “S3(STR)”
Set “Soft-Oﬀ by PWR-BTTN” to “Instant-Oﬀ”
Set “PME Event Wake Up” to “Disabled”
Set “Power On by Ring” to “Disabled”
Set “Resume by Alarm” to “Disabled”
Set “HPET Support” to “Enabled”
Set “HPET Mode” to “64-bit mode”
Set “Power On By Mouse” to “Disabled”
Set “Power On By Keyboard” to “Disabled”
Set “AC Back Function” to “Soft-Oﬀ”
II. Example
바닐라 커널에서 Nx/Dx를 활성화하기 위해서는
부팅옵션에 “”cpus=1“” 옵션주고 부팅시도해 본다.
혹은 Advanced Setup 들어가서 Execute Disable Bit 을 Enable 로 설정해준다.
III. Example
위 CMOS SETUP이 완벽하게 끝났음에도 불구하고 설치도중 다음과 같은 에러메시지가 발생한다면 손!
“”using 16384 buffer headers and 4096 cluster io buffer headers.“”

2009년 1월 28일 수요일

GA-EP45-UD3R MAC OSX Leopard 10.5.5 설치준비 사항

I. 하드웨어 구성

    메인보드  GA-EP45-UD3R
    CPU : Q9550   2.85GHz -> 3.6GHz (Over Clocking)
    RAM : DDR2 2GB (1GB x 2)
    그래픽 카드 : nVidia 7600GT - 256MB

    HDD 구성 : 1 IDE + 2 SATA + 1 FireWire + 1 USB HDD

II. CMOS setup 방법.

Standard CMOS Features:
1. Change the Date and Time to the correct values
2. Set “Drive A” to “None”
3. Set “Floppy 3 Mode Support” to “Disabled’
4. Set “Halt On” to “All, But Keyboard”

Advanced BIOS Features:
1. Set “First Boot Device” to “Hard Disk”
2. Set “Second Boot Device” to “CDROM”
3. Set “Third Boot Device” to “Disabled”
4. Set “HDD S.M.A.R.T. Capability” to “Enabled”
5. Set “Limit CPUID Max. to 3” to “Disabled”
6 Set “No-Execute Memory Protect” to “Enabled”
7. Set “CPU Enhanced Halt (C1E)” to “Enabled”
8. Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”
9. Set “CPU EIST Function” to “Enabled”
10. Set “Virtualization Technology” to “Enabled”
11. Set “Full Screen LOGO Show” to “Disabled”
12. Set “Init Display First” to “PEG”

Integrated Peripherals:
1. Set “SATA AHCI Mode” to “AHCI”
2. Set “SATA Port0-1 Native Mode” to “Enabled”
3. Set “USB Controller” to “Enabled”
4. Set “USB 2.0 Controller” to “Enabled”

5. Set “USB Keyboard Support” to “Enabled”
6. Set “USB Mouse Support” to “Enabled”
7. Set “Legacy USB storage detect” to “Enabled”
8. Set “Azalea Codec” to “Auto”
9. Set “Onboard H/W LAN” to “Enabled”
10. Set “Onboard IDE Controller” to “AHCI”
11. Set “Onboard Serial Port 1” to “Disabled"
12. Set “Onboard Parallel Port” to "Disabled”

Power Management Setup:
1. Set “ACPI Suspend Type” to “S3(STR)”
2. Set “Soft-Oﬀ by PWR-BTTN” to “Instant-Oﬀ”
3. Set “PME Event Wake Up” to “Disabled”
4. Set “Power On by Ring” to “Disabled”
5. Set “Resume by Alarm” to “Disabled”
6. Set “HPET Support” to “Enabled”
7. Set “HPET Mode” to “64-bit mode”
8. Set “Power On By Mouse” to “Disabled”
9. Set “Power On By Keyboard” to “Disabled”
10. Set “AC Back Function” to “Soft-Oﬀ”

III. 유의사항

1. boot-132 USB 준비

2. ich10r 칩셋

3. ALC 889A 사운드 드라이버

UD3RSoundtpatch.zip

4. RTL1000 랜 드라이버

5. P45칩셋

*. 관련 드라이버