2009년 2월 13일 금요일

CMOS setup 방법

  • I. CMOS setup 방법.
  • Standard CMOS Features.:
  • Change the Date and Time to the correct values 
  • Set “Drive A” to “None”
  • Set “Floppy 3 Mode Support” to “Disabled’ 
  • Set “Halt On” to “All, But Keyboard” 
  • Advanced BIOS Features: 
  • 1. Set “First Boot Device” to “Hard Disk” 
  • Set “Second Boot Device” to “CDROM” 
  • Set “Third Boot Device” to “Disabled” 
  • Set “HDD S.M.A.R.T. Capability” to “Enabled”
  • Set “Limit CPUID Max. to 3” to “Disabled” 
  • Set “No-Execute Memory Protect” to “Enabled” 
  • Set “CPU Enhanced Halt (C1E)” to “Enabled” 
  • Set “CPU Thermal Monitor 2 (TM2)” to “Enabled” 
  • Set “CPU EIST Function” to “Enabled” 
  • Set “Virtualization Technology” to “Enabled” 
  • Set “Full Screen LOGO Show” to “Disabled” 
  • Set “Init Display First” to “PEG” 
  • Execute Disable Bit to “Enabled”
  • Integrated Peripherals: 
  • Set “SATA AHCI Mode” to “AHCI” 
  • Set “SATA Port0-1 Native Mode” to “Enabled” 
  • Set “USB Controller” to “Enabled” 
  • Set “USB 2.0 Controller” to “Enabled” 
  • Set “USB Keyboard Support” to “Enabled” 
  • Set “USB Mouse Support” to “Enabled” 
  • Set “Legacy USB storage detect” to “Enabled” 
  • Set “Azalea Codec” to “Auto” 
  • Set “Onboard H/W LAN” to “Enabled” 
  • Set “Onboard IDE Controller” to “AHCI” 
  • Set “Onboard Serial Port 1” to “Disabled"
  • Set “Onboard Parallel Port” to "Disabled” 
  • Power Management Setup: 
  • Set “ACPI Suspend Type” to “S3(STR)” 
  • Set “Soft-Off by PWR-BTTN” to “Instant-Off” 
  • Set “PME Event Wake Up” to “Disabled” 
  • Set “Power On by Ring” to “Disabled” 
  • Set “Resume by Alarm” to “Disabled” 
  • Set “HPET Support” to “Enabled” 
  • Set “HPET Mode” to “64-bit mode” 
  • Set “Power On By Mouse” to “Disabled” 
  • Set “Power On By Keyboard” to “Disabled” 
  • Set “AC Back Function” to “Soft-Off”
  • II. Example
  • 바닐라 커널에서 Nx/Dx를 활성화하기 위해서는
  • 부팅옵션에 “”cpus=1“” 옵션주고 부팅시도해 본다.
  • 혹은 Advanced Setup 들어가서 Execute Disable Bit 을 Enable 로 설정해준다.
  • III. Example
  • 위 CMOS SETUP이 완벽하게 끝났음에도 불구하고 설치도중 다음과 같은 에러메시지가 발생한다면 손!
  • “”using 16384 buffer headers and 4096 cluster io buffer headers.“”

댓글 1개:

  1. trackback from: BOOT-132 용 USB 메모리 스틱 만들기
    Boot-132를 이용하여 Leopard를 설치하실려는 분이 많습니다.  i945칩셋 이상 권장, i975, p35, p45 칩셋 권장, Leopard 10.5.4 이상의 Retail DVD / 10.4.5 고스트 이미지 이 방법이 오히려 처음 해킨토시를 접하시는 분들에게는 더 쉽다는 개인적인 생각입니다. 또한 USB메모리 스틱을 이용하면 작게는 30MB나 조금 여유있게는 60MB정도의 공간을 이용할 수 있으며CD를 이용한 BOOT-132 방법보다..

    답글삭제