GA-EP45-UD3R 메인보드용 사운드카드 드라이버

GA-EP45-UD3R 메인보드용 사운드 카드 드라이버입니다.

http://tinyurl.com/cjvpa3

1. kext help를 이용하여 위url에서 다운로드 받은  kext화일을 드래그 엔 드랍으로 끌어다 놓으시고 패스워드 하단에 입력하시고 easy Install 적용하시면 알아서 설치하여 줍니다.

이후 재부팅시 옵션을 "-f -v"를 주고 부팅하고 난 후 환경설정에서 사운드카드가 잡혔는지 확인합니다.

2. 만약 여기서 잡히지 않았다면 OSX TOOLS를 이용하여 Remoce Kext xache를 실행하시고 재부팅하시고 다시 위의 1번을 실행합니다.

GA-EP45-UD3R MAC OSX Leopard 10.5.5 설치준비 사항

I. 하드웨어 구성
    
    메인보드  GA-EP45-UD3R
    CPU : Q9550   2.85GHz -> 3.6GHz (Over Clocking)
    RAM : DDR2 2GB (1GB x 2)
    그래픽 카드 : nVidia 7600GT - 256MB
    
    HDD 구성 : 1 IDE + 2 SATA + 1 FireWire + 1 USB HDD

II. CMOS setup 방법.

 

Standard CMOS Features:  1. Change the Date and Time to the correct values  2. Set “Drive A” to “None”  3. Set “Floppy 3 Mode Support” to “Disabled’  4. Set “Halt On” to “All, But Keyboard”  Advanced BIOS Features:  1. Set “First Boot Device” to “Hard Disk”  2. Set “Second Boot Device” to “CDROM”  3. Set “Third Boot Device” to “Disabled”  4. Set “HDD S.M.A.R.T. Capability” to “Enabled”  5. Set “Limit CPUID Max. to 3” to “Disabled”  6 Set “No-Execute Memory Protect” to “Enabled”  7. Set “CPU Enhanced Halt (C1E)” to “Enabled”  8. Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”  9. Set “CPU EIST Function” to “Enabled”  10. Set “Virtualization Technology” to “Enabled”  11. Set “Full Screen LOGO Show” to “Disabled”  12. Set “Init Display First” to “PEG”  Integrated Peripherals:  1. Set “SATA AHCI Mode” to “AHCI”  2. Set “SATA Port0-1 Native Mode” to “Enabled”  3. Set “USB Controller” to “Enabled”  4. Set “USB 2.0 Controller” to “Enabled”   5. Set “USB Keyboard Support” to “Enabled”  6. Set “USB Mouse Support” to “Enabled”  7. Set “Legacy USB storage detect” to “Enabled”  8. Set “Azalea Codec” to “Auto”  9. Set “Onboard H/W LAN” to “Enabled”  10. Set “Onboard IDE Controller” to “AHCI”  11. Set “Onboard Serial Port 1” to “Disabled"  12. Set “Onboard Parallel Port” to "Disabled”  Power Management Setup:  1. Set “ACPI Suspend Type” to “S3(STR)”  2. Set “Soft-Off by PWR-BTTN” to “Instant-Off”  3. Set “PME Event Wake Up” to “Disabled”  4. Set “Power On by Ring” to “Disabled”  5. Set “Resume by Alarm” to “Disabled”  6. Set “HPET Support” to “Enabled”  7. Set “HPET Mode” to “64-bit mode”  8. Set “Power On By Mouse” to “Disabled”  9. Set “Power On By Keyboard” to “Disabled”  10. Set “AC Back Function” to “Soft-Off”

III. 유의사항

1. boot-132 USB 준비

2. ich10r 칩셋

3. ALC 889A 사운드 드라이버 

UD3RSoundtpatch.zip

4. RTL1000 랜 드라이버

5. P45칩셋

*. 관련 드라이버