MSI P45 Neo2-FR

MSI P45 Neo2-FR

P45칩셋이라 리테일 DVD로 한방에 설치할 수 있지 않을까?

대원에서 판매하는 것 같던데...

잘만 준비하면 2시간에서 많게는 4시간 이내에 마무리 할 수 있지 않을까?

MOD BIOS 수정부터 해주어야 합니다.

그렇지 않으면 부팅옵션에 "cpus=1"을 주어 코어를 하나밖에 사용할 수 없습니다.

GA-EP45-UD3R MAC OSX Leopard 10.5.5 설치준비 사항

I. 하드웨어 구성
    
    메인보드  GA-EP45-UD3R
    CPU : Q9550   2.85GHz -> 3.6GHz (Over Clocking)
    RAM : DDR2 2GB (1GB x 2)
    그래픽 카드 : nVidia 7600GT - 256MB
    
    HDD 구성 : 1 IDE + 2 SATA + 1 FireWire + 1 USB HDD

II. CMOS setup 방법.

 

Standard CMOS Features:  1. Change the Date and Time to the correct values  2. Set “Drive A” to “None”  3. Set “Floppy 3 Mode Support” to “Disabled’  4. Set “Halt On” to “All, But Keyboard”  Advanced BIOS Features:  1. Set “First Boot Device” to “Hard Disk”  2. Set “Second Boot Device” to “CDROM”  3. Set “Third Boot Device” to “Disabled”  4. Set “HDD S.M.A.R.T. Capability” to “Enabled”  5. Set “Limit CPUID Max. to 3” to “Disabled”  6 Set “No-Execute Memory Protect” to “Enabled”  7. Set “CPU Enhanced Halt (C1E)” to “Enabled”  8. Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”  9. Set “CPU EIST Function” to “Enabled”  10. Set “Virtualization Technology” to “Enabled”  11. Set “Full Screen LOGO Show” to “Disabled”  12. Set “Init Display First” to “PEG”  Integrated Peripherals:  1. Set “SATA AHCI Mode” to “AHCI”  2. Set “SATA Port0-1 Native Mode” to “Enabled”  3. Set “USB Controller” to “Enabled”  4. Set “USB 2.0 Controller” to “Enabled”   5. Set “USB Keyboard Support” to “Enabled”  6. Set “USB Mouse Support” to “Enabled”  7. Set “Legacy USB storage detect” to “Enabled”  8. Set “Azalea Codec” to “Auto”  9. Set “Onboard H/W LAN” to “Enabled”  10. Set “Onboard IDE Controller” to “AHCI”  11. Set “Onboard Serial Port 1” to “Disabled"  12. Set “Onboard Parallel Port” to "Disabled”  Power Management Setup:  1. Set “ACPI Suspend Type” to “S3(STR)”  2. Set “Soft-Off by PWR-BTTN” to “Instant-Off”  3. Set “PME Event Wake Up” to “Disabled”  4. Set “Power On by Ring” to “Disabled”  5. Set “Resume by Alarm” to “Disabled”  6. Set “HPET Support” to “Enabled”  7. Set “HPET Mode” to “64-bit mode”  8. Set “Power On By Mouse” to “Disabled”  9. Set “Power On By Keyboard” to “Disabled”  10. Set “AC Back Function” to “Soft-Off”

III. 유의사항

1. boot-132 USB 준비

2. ich10r 칩셋

3. ALC 889A 사운드 드라이버 

UD3RSoundtpatch.zip

4. RTL1000 랜 드라이버

5. P45칩셋

*. 관련 드라이버