Motherboard: MSI 770-C45
CPU: AMD Phenom ii x4 965be C3
GFX: ATI Sapphire Radeon HD 4650 1Gb DDR2 PCI-e (method may work for any other Mobos as well)
-2Gb or more of DDR3 Ram
-SATA DVD Optical Drive
-SATA Hard Drive (I do not recommend doing a partition, get an extra hard drive its better & less issues)
-USB Mouse / Keyboard or PS2 Keyboard / Mouse (I'd recommend USB Keyboard / Mouse)
-해킨배포본: Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard
리테일 설치방식이 아닌 해킨배포본 설치방식이고 IDE 관련 장비는 사용하지 않았습니다.
Utorrent를 이용하여 Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard 해킨배포본 이미지를 다운로드하여 일반 DVD 에 윈도우즈에서 UltraISO나 네로를 이용하여 2배속 혹은 4배속으로 구워 부팅한다.
시스템 시작시 DEL키를 눌러 다음과 같이 CMOS를 세팅하여 준다.
-Head into Cell Menu:
AMD Cool n Quiet: Disabled
만약, 오버클럭을 사용하고 있다면 전부 DEFAULT로 세팅하고 난후 이 과정을 진행한다.
On-Chip ATA Devices -> Raid Mode -> Change IDE to AHCI
F10 을 눌러 세팅한 것을 저장하고 마친다.
컴퓨터가 재부팅하고 F11키를 눌러서 DVD드라이버를 선택한다. 물론, 앞서 구워둔 해킨배포본 DVD를 넣어줘야 한다.
Chameleon 부팅 스크린이 F8 키를 눌러서 부팅 아규먼트를 준다. : -v busratio=20
(쿼드 CPU가 아니고 다른 CPU를 사용한다면 다음 부팅 아규먼트를 적용해보았으면 한다. : -v cpus=1 )
다음 설치과정 : http://x86osx.textcube.com/notice/481
When the language screen is loaded select your language..... once you see the installing screen *Do not run it yet*.... head over to the top: Utilities > Disk Utility
Formatting Hard Drive:
After you have gone to Utilities > Disk Utility
Select your Hard Drive(the one you plan on installing Snow Leopard)
Options > GUID
Format: Mac Os Journalized
Name your partition with a very simple name: snowhd
Afterwards close Disk Utility.. and finally we will begin Installation
Click Continue > Agree > Select Hard Drive > Customize
다음은 사용자화 옵션 선택사항이다.
AnV 10.2.0 / system kext
Chameleon RC3 PC EFI 10.5
ATI 43x0 45x0 46x0 - This is only if you have my same graphics card (I'll provide the solution for full Q'E)
Legacy AHCI Sata
IOATAFamily SATA Fix
*PS2 apple - ONLY CHOOSE THIS IF YOU DON'T HAVE USB MOUSE / KEYBOARD
About My Mac Fix
Choose Install, if the DVD Test starts... let it run until 10% you may skip it from there.
Install should take 15 - 25min or so.... if it all went well... Great! Restart
Upon restarting Boot Options again: Press F11
Choose your Hard Drive (where you installed Snow)
Boot Arguments: -v busratio=20
You my encounter the Chameleon does not have a boot timeout... don't worry we will fix this later
If you have over 4Gb of Ram you must need to use as boot arguments: -v busratio=20 maxmem=4096
If you are lucky.... it will all go through.. and you will get a Grey Screen with your mouse(you will not see the Animated OSX Intro)...wait a bit... the language screen will appear.... do all your process of setting up all your info & when done you should appear on your Snow Leopard 10.6.2 Desktop.
No transparency, Q'E or Audio... but you may connect your Ethernet Lan... your internet connection already works
*Lets add Boot Timeout & busratio=20 or busratio=20 maxmem=4096 to com.appleBoot.plist
Finder > select Hard Drive > Library > Preferences > SystemConfguration
Drag to your Desktop: com.appleBoot.plist
Right-Click in your Desktop "com.appleBoot.plist" get info > Open With > choose: Textedit.app > Apply Changes to all
Afterwards just double click: com.appleBoot.plist
Make changes similar to this
Now simply, again Finder > Hard Drive > Library > Prefrences > SystemConfiguration
Right-Click: com.appleBoot.plist > move to Trash
Now Drag com.appleBoot.plist from Desktop to the Windows: Finder > Hard Drive > Library > Prefrences > SystemConfiguration
Drag it as well inside: Finder > Hard Drive > Extra
Getting AUDIO(ALC888S / ALC885):
Download this package: http://www.mediafire.com/?1u2wnfmmdnj
After downloading, install it: AzaliaAudio.pkg
Reboot, upon your Desktop you should already have Audio (Sorry MIC does not work, this is only for Speakers Audio.. if you plan on recording... just use an M-Audio USB device)
Getting Full Q'E for ATI Saphire Radeon HD 4650 1Gb DDR2 PCI-e:
This also works for anybody with this same graphics card on any other motherboard with Snow 10.6.2
This is for VGA, I have not tested DVI (DVI alone, DVI to VGA or DVI to HDMI) or HDMI
Replace boot file with this one(Beta PCEFI 10.5): http://www.mediafire.com/?znznlozgnng
Spotlight search for: Terminal
I'd recommend go to Finder > Applications > Terminal (Drag it to your Dock)
Go to Finder > Applications > Kext Utility (Drag it to your Dock)
Download these 2 kext files:
Drag them each alone to Kext Utility... enter password & wait... hopefully everything went well and you didn't get any kernel panics
Reboot you should be granted Full Q'E & all Resolutions with VGA.... *You should see Transparency in the Top Apple Menu Bar* change your Display Resolution in System Preferences
Just in case my Device ID for my Card is: ID: 9498 Vendor: 1002
If your Device ID is different(go to Apple icon > About This Mac > More Info.. > Graphics/Display), Manually Add your Device ID inside ATI4600Controller.kext before dragging them into Kext Utility
I don't think you need to add it inside ATIRadeonX2000.kext (I didn't add it on mines)
*NOTE* This is for DESKTOP VERSIONS ONLY - No Mobility versions work
If you have issues like Blank Screen or Garbled Screen (already testing booting up again changing VGA, DVI or HDMI)
Power off Computer > Restart
Boot as Single User mode:
And you should be back how it was before, booting back as normal in Snow... head into Netkas.org for another graphics solution.
2. ERROR ON BOOT / NO CHAMELEON / NO PC_EFI 10.5 / REALLY OLD DARWIN
THIS WILL ALSO REVERTS YOU BACK TO YOUR REGULAR BOOT LOADER
Boot with the DVD Installer "Snow Leopard Client-Server 10.6.2 SSE2/SSE3 Intel AMD"
Once finalized booted inside, click: Utilities > Terminal
3. If you can boot regularly into Snow and you simply want to have your Regular boot loader back:
Once inside Snow: Finder -> Search For: Terminal
Then Repair Permissions with "Kext Utility" & Reboot
And you should be back as before adding anything of mines.
Hopefully all this worked for you guys as it worked for me
If I did any bad terminal commands please let me know I'll fix them.