MSI 770-C45에 해킨토시 설치하기

Motherboard: MSI 770-C45
CPU: AMD Phenom ii x4 965be C3
GFX: ATI Sapphire Radeon HD 4650 1Gb DDR2 PCI-e (method may work for any other Mobos as well)
-2Gb or more of DDR3 Ram
-SATA DVD Optical Drive
-SATA Hard Drive (I do not recommend doing a partition, get an extra hard drive its better & less issues)
-USB Mouse / Keyboard or PS2 Keyboard / Mouse (I'd recommend USB Keyboard / Mouse)
-해킨배포본: Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard


리테일 설치방식이 아닌 해킨배포본 설치방식이고 IDE 관련 장비는 사용하지 않았습니다.

Utorrent를 이용하여 Snow Leopard Client Server 10.6.2 SSE2/SSE3 Intel AMD by Hazard 해킨배포본 이미지를 다운로드하여 일반 DVD 에 윈도우즈에서 UltraISO나 네로를 이용하여 2배속 혹은 4배속으로 구워 부팅한다.


Bios 세팅:
시스템 시작시 DEL키를 눌러 다음과 같이 CMOS를 세팅하여 준다.

-Head into Cell Menu:
AMD Cool n Quiet: Disabled
만약, 오버클럭을 사용하고 있다면 전부 DEFAULT로 세팅하고 난후 이 과정을 진행한다.

-Integrated Peripherals:
On-Chip ATA Devices -> Raid Mode -> Change IDE to AHCI

F10 을 눌러 세팅한 것을 저장하고 마친다.

컴퓨터가 재부팅하고 F11키를 눌러서 DVD드라이버를 선택한다.  물론, 앞서 구워둔 해킨배포본  DVD를 넣어줘야 한다.

Chameleon 부팅 스크린이 F8 키를 눌러서 부팅 아규먼트를 준다. :  -v busratio=20
(쿼드 CPU가 아니고 다른 CPU를 사용한다면 다음 부팅 아규먼트를 적용해보았으면 한다. : -v cpus=1 )

다음 설치과정 : http://x86osx.textcube.com/notice/481

When the language screen is loaded select your language..... once you see the installing screen *Do not run it yet*.... head over to the top: Utilities > Disk Utility

Formatting Hard Drive:
After you have gone to Utilities > Disk Utility

Select your Hard Drive(the one you plan on installing Snow Leopard)
Choose: Partition
1 Partition
Options > GUID
Format: Mac Os Journalized
Name your partition with a very simple name: snowhd

Afterwards close Disk Utility.. and finally we will begin Installation

Click Continue > Agree > Select Hard Drive > Customize

다음은 사용자화 옵션 선택사항이다.

AnV 10.2.0 / system kext
Chameleon RC3 PC EFI 10.5
AMD patch
ATI 43x0 45x0 46x0 - This is only if you have my same graphics card (I'll provide the solution for full Q'E)
ATIATA
Realtek R1000
EliotForceLegacyRTC
SATA/ATA
Legacy AHCI Sata
LegacyApplePIIXATA
IOATAFamily SATA Fix
IOATAFamily Fix
*PS2 apple - ONLY CHOOSE THIS IF YOU DON'T HAVE USB MOUSE / KEYBOARD
EvOreboot
Orange Icon
About My Mac Fix
SMBiosResolver
UUID
rosetta
X11

Choose Install, if the DVD Test starts... let it run until 10% you may skip it from there.
Install should take 15 - 25min or so.... if it all went well... Great! Restart

Upon restarting Boot Options again: Press F11
Choose your Hard Drive (where you installed Snow)

Press F8
Boot Arguments: -v busratio=20
You my encounter the Chameleon does not have a boot timeout... don't worry we will fix this later
If you have over 4Gb of Ram you must need to use as boot arguments: -v busratio=20 maxmem=4096

If you are lucky.... it will all go through.. and you will get a Grey Screen with your mouse(you will not see the Animated OSX Intro)...wait a bit... the language screen will appear.... do all your process of setting up all your info & when done you should appear on your Snow Leopard 10.6.2 Desktop.

No transparency, Q'E or Audio... but you may connect your Ethernet Lan... your internet connection already works


*Lets add Boot Timeout & busratio=20 or busratio=20 maxmem=4096 to com.appleBoot.plist
Finder > select Hard Drive > Library > Preferences > SystemConfguration
Drag to your Desktop: com.appleBoot.plist

Right-Click in your Desktop "com.appleBoot.plist" get info > Open With > choose: Textedit.app > Apply Changes to all

Afterwards just double click: com.appleBoot.plist
Make changes similar to this

CODE

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Kernel</key>
    <string>mach_kernel</string>
    <key>Kernel Flags</key>
    <string>busratio=20 maxmem=4096</string>
    <key>Timeout</key>
    <string>3</string>
    <key>Boot Loader Timeout</key>
    <string>3</string>
</dict>
</plist>

Now simply, again Finder > Hard Drive > Library > Prefrences > SystemConfiguration
Right-Click: com.appleBoot.plist > move to Trash
Now Drag com.appleBoot.plist from Desktop to the Windows: Finder > Hard Drive > Library > Prefrences > SystemConfiguration

*Optional*
Drag it as well inside: Finder > Hard Drive > Extra



Getting AUDIO(ALC888S / ALC885):
Download this package: http://www.mediafire.com/?1u2wnfmmdnj
After downloading, install it: AzaliaAudio.pkg
Reboot, upon your Desktop you should already have Audio (Sorry MIC does not work, this is only for Speakers Audio.. if you plan on recording... just use an M-Audio USB device)

Getting Full Q'E for ATI Saphire Radeon HD 4650 1Gb DDR2 PCI-e:
This also works for anybody with this same graphics card on any other motherboard with Snow 10.6.2

This is for VGA, I have not tested DVI (DVI alone, DVI to VGA or DVI to HDMI) or HDMI
Replace boot file with this one(Beta PCEFI 10.5): http://www.mediafire.com/?znznlozgnng

Spotlight search for: Terminal
I'd recommend go to Finder > Applications > Terminal (Drag it to your Dock)

CODE

sudo su
write-your-password
mv /boot /boot.bak
cp DRAG-NEW-BOOT-FILE-HERE /
exit

Go to Finder > Applications > Kext Utility (Drag it to your Dock)

Download these 2 kext files:
ATIRadeonX2000.kext: http://www.mediafire.com/?wzwmujymmvn
ATI4600Controller.kext: http://www.mediafire.com/?gtuyjlmhd5l

Drag them each alone to Kext Utility... enter password & wait... hopefully everything went well and you didn't get any kernel panics

Reboot you should be granted Full Q'E & all Resolutions with VGA.... *You should see Transparency in the Top Apple Menu Bar* change your Display Resolution in System Preferences


Just in case my Device ID for my Card is: ID: 9498 Vendor: 1002
If your Device ID is different(go to Apple icon > About This Mac > More Info.. > Graphics/Display), Manually Add your Device ID inside ATI4600Controller.kext before dragging them into Kext Utility
I don't think you need to add it inside ATIRadeonX2000.kext (I didn't add it on mines)

*NOTE* This is for DESKTOP VERSIONS ONLY - No Mobility versions work




FIXING ERRORS

If you have issues like Blank Screen or Garbled Screen (already testing booting up again changing VGA, DVI or HDMI)

Power off Computer > Restart

Boot as Single User mode:

CODE

-s
/sbin/mount -uw /
cd /System/Library/Extensions
mv ATI4600Controller.kext ATI4600Controller.kext.bak
mv ATIRadeonX2000.kext ATIRadeonX2000.kext.bak
reboot

And you should be back how it was before, booting back as normal in Snow... head into Netkas.org for another graphics solution.

2. ERROR ON BOOT / NO CHAMELEON / NO PC_EFI 10.5 / REALLY OLD DARWIN
THIS WILL ALSO REVERTS YOU BACK TO YOUR REGULAR BOOT LOADER
SOLUTION:

Boot with the DVD Installer "Snow Leopard Client-Server 10.6.2 SSE2/SSE3 Intel AMD"
Once finalized booted inside, click: Utilities > Terminal

CODE

cd /Volumes/YOUR-SNOW-LEOPARDS-HARD-DRIVES-NAME
mv boot.bak boot
reboot

3. If you can boot regularly into Snow and you simply want to have your Regular boot loader back:
SOLUTION:

Once inside Snow: Finder -> Search For: Terminal

CODE

sudo su
//write your password
mv /boot.bak /boot
exit

Then Repair Permissions with "Kext Utility" & Reboot
And you should be back as before adding anything of mines.

Hopefully all this worked for you guys as it worked for me
If I did any bad terminal commands please let me know I'll fix them.